JBL Recone Kits :: JBL 2206G Kit

JBL 2206G, 4 ohm complete drop-in recone kit

In Stock - Ships in 1 Business Day

Now you can recone your JBL 2206G woofer yourself and save.

This Pro Parts, recone kit comes with everything you need to recone your JBL 2206G, cone with surround, spider, edge wound aluminum voice coil, dust cap, gaskets, lead wires, centering shims, glue and instructions. The voice coil, spider, cone and lead wires come pre-glued and attached to make installation very simple. The surround has also been pre-treated.

This is a fantastic aftermarket kit. The cone of our JBL kits are very stiff and hard just like the originals. The voice coil is made of high temperature flat wound aluminum wire just like the originals. This kit will restore your speaker to like new performance at a fraction of the cost of replacing it.

Speaker reconing is not rocket science. The hardest part about reconing speakers is centering and setting the voice coil to the proper depth. We have set the depth for you and your kit comes with centering shims to align the coil perfectly every time.

Click here for the step by step, easy to follow instructions for installing our Pro Parts, DIY recone kits.

• 4 ohm
• 600 watts
• DCR 3.7
• Voice coil diameter 4-in or 100mm
• Frequency Response 45Hz - 3.5kHz
• Voice coil material is aluminum edge-wound
• Voice coil former material is Kapton

The voice coil has the correct polarity, the same as the original JBL 2206G kit. When positive voltage is given to the negative terminal, the cone will move out in a forward motion.

This kit is available in 4 and 8 ohms.

Note: due to the U.S. Department of Transportation regulations, kits shipped outside the U.S. will not include adhesive.

Item Code: JBL 2206G Kit