JBL Recone Kits :: JBL 2206H Kit

JBL 2206H, 8 ohm complete drop-in recone kit

In Stock - Ships in 1 Business Day

Now you can recone your JBL 2206H woofer yourself and save.

This Pro Parts, recone kit has everything you need to recone your JBL 2206H, cone, spider, edge wound / flat wound aluminum voice coil, dust cap, gaskets, lead wires, centering shims, glue and instructions. The voice coil, spider, cone and lead wires come pre-glued and attached to make installation very simple. The surround has also been pre-treated.

This is the best aftermarket available on the market. This is not just a preassembled version of the kits found elsewhere on the internet. This is a completely different kit from the ground up. The cone of this kit is not the soft cone like the others sell, but hard just like the original. The voice coil of this kit also has the correct polarity, the same polarity as the original JBL 2206H kits.

Speaker reconing is not rocket science. The hardest part about reconing speakers is centering and setting the voice coil to the proper depth. We have set the depth for you and your kit comes with centering shims to align the coil in the gap perfectly every time.

Click here for the step by step, easy to follow instructions for installing our Pro Parts, DIY recone kits.

• 8 ohm
• 600 watts
• DCR 5.3
• Voice coil diameter 4-in or 100mm
• Frequency Response 45Hz - 3.5kHz
• Voice coil material is aluminum edge-wound
• Voice coil former material is Kapton

The voice coil has the correct polarity, the same as the original JBL 2206H kit. When positive voltage is given to the negative terminal, the cone will move out in a forward motion.

This kit is available in 4 and 8 ohms.

Note: due to the U.S. Department of Transportation regulations, recone kits shipped outside the U.S. will not include adhesive.