Not yet rated
Write a Review »
$105.00 Web Price Only
EV Eliminator, 18-in preassembled, replacement recone kit.
This easy to install, preassembled Eliminator 18-in recone kit will get your speaker up and running again.
This recone kit comes with everything you need to recone your Electro Voice Eliminator 18:
cone with surround, spider, edge wound aluminum voice coil, dust cap, gaskets, lead wires,
centering shim, glue and instructions. The voice coil, spider, cone and lead wires come
pre-glued and attached, to make installation very simple. The surround has also been
pre-treated. This kit was assembled using a jig / fixture designed specifically to produce
this individual recone kit. Using this jig to assemble the recone kit insures that the voice
coil is glued to the spider and cone at the proper depth every time. High strength,
cyanoacrylate adhesive is used to attach the coil, spider and cone for a lightweight
superior glue joint. Moyen RS-3087 adhesive is supplied with each kit for attaching
the spider and surround to the speaker frame.
This is without a doubt the very best preassembled Electro Voice recone kit available, anywhere.
We are so sure that you will be happy with this kit that we offer a 100% satisfaction guarantee!
Upon receiving your kit, if you are not 100% satisfied, simply return the uninstalled kit for a
full refund of the purchase price.
Speaker reconing is not rocket science. The hardest part about reconing speakers is
centering and setting the voice coil to the proper depth. We have set the depth for you and
your kit comes with a centering shim to align the coil to the voice coil gap perfectly every
- Eliminator 18
- 18-in recone kit
- Impedance 8 ohm
- DCR 5.7
- 400 watts continuous
- 1600 watts peak
- Frequency Response
- Voice coil diameter 2.5-in or 63.5mm
- Voice coil material is aluminum edge-wound
- Voice coil former material is Kapton
Item Code:: Electro-Voice-DL18BFH-Kit