Eminence Kappa Lite 3015 Preassembled Recone Kit
Not yet rated
Write a Review »
$90.00 Web Price Only
Now you can recone your Eminence Kappa Lite 3015
speaker yourself and save.
This Original Equipment Manufacturer (OEM) recone kit comes with everything you need to recone your Eminence Kappa Lite 3015 , cone with surround, spider, voice coil, dust cap, gaskets, lead wires, centering shim, glue and instructions. The voice coil, spider, cone and lead wires come pre-glued and attached, to make installation very simple. The surround has also beenpre-treated. This kit was assembled using a jig / fixture designed specifically to produce this individual recone kit.
Using this jig to assemble the recone kit insures that the voice coil is glued
to the spider and cone at the proper depth every time. High strength, slow cure
cyanoacrylate adhesive is used to attach the coil, spider and cone for a
lightweight superior glue joint. Moyen RS-3087 adhesive is supplied with each
kit for attaching the spider and surround to the speaker frame.
This kit comes directly from Eminence. We are so sure that you will be happy with this kit that we offer a 100% satisfaction guarantee! Upon receiving your kit, if you are not 100% satisfied, simply return
the uninstalled kit for a full refund of the purchase price.
2 year limited warranty. See details below.
Speaker reconing is not rocket science. The
hardest part about reconing speakers is centering and setting the voice coil to
the proper depth. We have set the depth for you and your kit comes with a
centering shim to align the coil to the voice coil gap perfectly every time.
Click here for the step by step, easy to follow
instructions for installing our Pro Parts, DIY recone kits.
Yes, these are the instructions for our JBL kits, but the instructions are the
same for our Eminence kits.
- Eminence Kappa Lite 3015
- 15-in recone kit
- Impedance 8 ohm
- DCR 5.27
- Power Handling 450 watts
- Frequency Response
40 Hz ? 4 KHz
- Voice coil diameter 3-in or 76.2mm
- Voice coil former material is Kapton
Pro Parts product warranty,
This kit is designed for installation by the end user. The person installing
this kit should possess a minimum amount of mechanical ability. If you are
unsure about installing this kit, please consult an authorized repair center.
This warranty will only cover properly installed recone kits.
This Pro Parts recone kit is guaranteed for two years from the date of original
purchase against malfunction due to defects in workmanship and materials. If, in
the unfortunate event this recone kit should malfunction, Pro Parts will repair
or replace the recone kit (at our discretion) without charge for materials or
labor, if the entire speaker itself, frame and all (not including the cabinet),
is delivered postage paid and return postage prepaid to the original place of
purchase. Proof of purchase is required. This warranty does not cover appearance
and finish of the kit, burned or overpowered voice coils due to abuse of cone,
and/or coil damage as a result of negligence from improperly designed
enclosures, or malfunctioning of other equipment, nor does it extend to
incidental or consequential damages. Repairs by unauthorized repair centers will
void this warranty.
Item Code:: Eminence-Kappa-Lite-3015-Kit