Eminence Omega Pro 8 Ohm Preassembled Recone Kit
Not yet rated
Write a Review »
$105.00 Web Price Only
Eminence Omega Pro 18A, 18-in preassembled, replacement
This easy to install, preassembled Omega Pro 18A, 18-in recone
kit will get your speaker up and running again.
This Pro Parts recone kit comes with everything
you need to recone your Omega Pro 18A, cone with surround, spider, voice coil, dust cap, gaskets, lead wires, centering shim, glue
and instructions. The voice coil, spider, cone and lead wires come pre-glued and
attached, to make installation very simple. The surround has also been
pre-treated. This kit was assembled using a jig / fixture designed specifically to produce this individual recone kit.
Using this jig to assemble the recone kit insures that the voice coil is glued
to the spider and cone at the proper depth every time. High strength, slow cure
cyanoacrylate adhesive is used to attach the coil, spider and cone for a
lightweight superior glue joint. Moyen RS-3087 adhesive is supplied with each
kit for attaching the spider and surround to the speaker frame.
This is without a doubt the very best
preassembled Eminence recone kit available, anywhere. We are so sure that
you will be happy with this kit that we offer a 100% satisfaction guarantee! Upon receiving your kit, if you are not 100% satisfied, simply return
the uninstalled kit for a full refund of the purchase price.
2 year limited warranty.
Click here for details.
Speaker reconing is not rocket science. The
hardest part about reconing speakers is centering and setting the voice coil to
the proper depth. We have set the depth for you and your kit comes with a
centering shim to align the coil to the voice coil gap perfectly every time.
Click here for the step by step, easy to follow
instructions for installing our Pro Parts, DIY recone kits.
Yes, these are the instructions for our JBL kits, but the instructions are the
same for our Eminence kits.
- Omega Pro 18A
- 18-in recone kit
- Impedance 8 ohm
- DCR 5.2
- 800 watts continuous
- 1600 watts peak
- Frequency Response
- Voice coil diameter 4-in or 101.6mm
- Voice coil material is copper edge-wound
- Voice coil former material is Polyimide
Item Code:: Eminence-Omega-Pro-18A-Kit