JBL2204H 8 Ohm Preassembled Recone Kit
Not yet rated
Write a Review »
$75.00 Web Price Only
JBL 2204H cloth surround recone kit:
This JBL 2204H, 8 ohm reproduction recone kit is absolutely the finest
recone kit for the JBL 2204H available anywhere. This is a one piece, preassembled,
drop-in kit. It is complete and comes with every thing you need to recone this speaker yourself. Very easy to install.
Click here to see.
If you have a JBL 2204H, and you want the classic sound that it had when it was
new, then you need to recone your speaker with this kit.
We have done a lot of research on this kit. We know you want the very best for
your vintage speaker. We started with the voice coil, custom made for
SoundSpeakerRepair.com. The voice coil is flat wire wound / edge wound, with
copper ribbon. The coil has the correct
polarity and DCR of 6.2. Yes this is the correct DCR for an 8 ohm JBL 2204H coil.
If you recone a JBL 2204, 8 ohm speaker with a DCR other then the correct DCR
of 6.2, your speaker will not sound like a 2204
The original JBL 2204H kit assembly (cone over coil, spider over
cone) was difficult and unpractical way of assembling. Also, the original spider is no longer in
production. JBL has moved to a new, now standard, assembly method (spider over coil,
cone over spider). We have also adopted this method and use the modern JBL
The cone shape is curve linear with a cloth surround.
This 2204H recone kit is pre-assembled using our custom
manufactured jig, created exclusively for this recone kit. Using this jig to assemble the 2204 recone
kits ensures the spider and cone are set to the exact proper depth to put
the voice coil in dead center to the magnets top plate every time, giving you
the most efficient speaker possible after reconing. We use only top grade
cyanoacrylate adhesive for the coil to spider joint and spider to cone joint
resulting in a superior light weight bound that will hold up with years of use.
We use an aftermarket paper dust cap for this kit..
We include a 1 oz. tube of glue with this kit for gluing
the surround and spider to the frame. This is the same Moyen RS-3087 adhesive that is
shipped with original JBL recone kits and re-packaged for
A voice coil centering shim is included. The shim is used
to keep the voice coil centered in the voice coil gap while the recone kit is
fitted to the speaker
frame. The shim is removed after the adhesive has dried.
Printed instructions are included with the kit, and can also be view online.
Click here for step-by-step, easy to follow instructions for installing our
Pro Parts DIY recone kits.
Guarantee and Warranty:
And on top of all this, each kit comes with a 100%
satisfaction guarantee and a 2
Click here for full guarantee and warranty details.
Item Code:: JBL-2204H-Recone-Kit