 |
 |
 |
| |
|
Alternate Views (Click Thumbnails) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electro Voice, EV, DL15W Recone Kit
Average Rating:
Not yet rated
Write a Review »
$65.00 Web Price Only
In Stock? Yes - Ships Same Day.
details
Now you can recone your Electro Voice DL15W
speaker yourself and save.
This kit will replace the foam surround kit that is
in your speaker now. Cloth surround kit will not rot like the foam surrounds do.
Note: because the frame of the DL15W is the same as
the EVM15B, the kit we are selling in this item description is the EVM15B kit
and reconing your DL15W with this kit will give your speaker the same
specifications as an EVM15B as shown below in the specifications sections below.
This Pro Parts recone kit comes with everything
you need to recone your Electro Voice DL15W, cone with cloth surround, spider, edge
wound aluminum voice coil, dust cap, gaskets, lead wires, centering shim, glue
and instructions. The voice coil, spider, cone and lead wires come pre-glued and
attached, to make installation very simple. The surround has also been
pre-treated. This kit was assembled using a jig / fixture designed
specifically to produce this individual recone kit.
Using this jig to assemble the recone kit insures that the voice coil is glued
to the spider and cone at the proper depth every time. High strength, slow cure
cyanoacrylate adhesive is used to attach the coil, spider and cone for a
lightweight superior glue joint. Moyen RS-3087 adhesive is supplied with each
kit for attaching the spider and surround to the speaker frame.
This is without a doubt the very best
preassembled Electro Voice recone kit available,
anywhere. We are so sure that
you will be happy with this kit that we offer a 100% satisfaction guarantee! Upon receiving your kit, if you are not 100% satisfied, simply return
the uninstalled kit for a full refund of the purchase price.
2 year limited warranty. See details below.
Speaker reconing is not rocket science. The
hardest part about reconing speakers is centering and setting the voice coil to
the proper depth. We have set the depth for you and your kit comes with a
centering shim to align the coil to the voice coil gap perfectly every time.
Click here for step by step
video for installing this Pro Parts recone kits.
Specifications after reconing your DL15W with
this recone kit;
- 15-in recone kit
- Impedance 8 ohm
- DCR 5.1
- Power Handling 400 watts
- Frequency Response 50-5000 Hz
- Voice coil diameter 2.5-in or 63.5mm
- Voice coil material is aluminum edge-wound
- Voice coil former material is Kapton
Note: due to the U.S. Department of
Transportation regulations, kits shipped outside the U.S. will not include
adhesive. Kits that contain adhesives can only be shipped via ground service.
Click here for complete warranty information.
Item Code:: DL15W
|
