Electro Voice Kits :: EVM-15B

Electro Voice, EV, EVM 15B Recone Kit

Average Rating:    Write a Review »

In Stock? Yes - Ships Same Day.  details

This Pro Parts recone kit comes with everything you need to recone your Electro Voice EVM 15B, cone with surround, spider, edge wound aluminum voice coil, dust cap, gaskets, lead wires, centering shim, glue and instructions. The voice coil, spider, cone and lead wires come pre-glued and attached, to make installation very simple. The surround has also been pre-treated. This kit was assembled using a jig / fixture designed specifically to produce this individual recone kit. Using this jig to assemble the recone kit insures that the voice coil is glued to the spider and cone at the proper depth every time. High strength, slow cure cyanoacrylate adhesive is used to attach the coil, spider and cone for a lightweight superior glue joint. Moyen RS-3087 adhesive is supplied with each kit for attaching the spider and surround to the speaker frame.

This is without a doubt the very best preassembled Electro Voice recone kit available, anywhere. We are so sure that you will be happy with this kit that we offer a 100% satisfaction guarantee! Upon receiving your kit, if you are not 100% satisfied, simply return the uninstalled kit for a full refund of the purchase price.

Want to get more power handling out of your EVM 15B? Upgrade to a 15B Pro-Line kit, click here.

Speaker reconing is not rocket science. The hardest part about reconing speakers is centering and setting the voice coil to the proper depth. We have set the depth for you and your kit comes with a centering shim to align the coil to the voice coil gap perfectly every time.

Click here to see a step-by-step video showing how easy it is to recone your speaker with a preassembled Pro Parts recone kit.

• Electro Voice EVM 15B
• 15-in recone kit
• Impedance 8 ohm
• DCR 5.1
• Power Handling 200 watts
• Frequency Response 50-5000 Hz
• Voice coil diameter 2.5-in or 63.5mm
• Voice coil material is aluminum edge-wound
• Voice coil former material is Kapton

Note: due to the U.S. Department of Transportation regulations, kits shipped outside the U.S. will not include adhesive. Kits that contain adhesives can only be shipped via ground service.

Item Code:: EVM-15B

Customer Reviews for EVM-15B Average Rating: (7 reviews) Click here to write a review and share your thoughts with others.   Looks good, 12.17.2009 Reviewer: Jon Mernyk (Rydal, PA) High quality parts, should be a breeze to install.   2 x recone just completed, 11.29.2009 Reviewer: Gerard Moeken (Mol, Antwerp) This is to confirm that the EVM-15B recone kit delivers everything it promises. Just finished the recone of 2 EVM-15B speakers. Both are working fine again. Now I will use them to make a compact bass cabinet to go with our Eden Nemesis amp. The other will be used to make a second speaker cabinet to go with my Kustom KBA combo.   Reno NV, 10.27.2009 Reviewer: Douglas Sandall (Reno, NV) This kit was a cinch to install. It sounded and looked great. I highly recommend this kit to all who want the best.   So much easier now., 10.15.2009 Reviewer: Ed McEowen (Jerico Springs, MO) With the voice coil already in place, assembly is so much easier now, almost fool-proof. The original do-it-yourself kits required much more skill and knowledge and the parts didn't always fit well. The only difficulty with this kit is making the glue around the dustcap look good. A more fluid glue would help when a second coat is needed there. Avoid a second application.   Quality A+, 5.15.2009 Reviewer: Greg Arich (Calgary, Alberta) I purchased 2 of these kits and I was a little leary on yhe quality and sound. On top of that I had never reconed a speaker before. I was finished doing 2 speakers in 1.5 hrs it was easy and they sound GREAT no different than original and at a quarter of the cost THANK YOU SO MUCH GREG ARICH TITAN PRODUCTIONS CALGARY ALBERTA CANADA   View All 7 Reviews »