|
 |
Electro Voice, EV, SRO 15B Recone Kit
Average Rating:
Not yet rated
Write a Review »
$65.00 Web Price Only
In Stock - Ships in 1 Business Day
This is a one-piece, preassembled replacement
Electro Voice SRO 15B recone kit.
The kit we use for the SRO 15B is the same kit as
our EVM 15B. Because the frames for the SRO and EVM are exactly the same, using
this kit will upgrade your SRO 15B to a EVM 15B.
What is the difference between the original SRO 15B kit any your EVM 15B kit?
Good question. The original SRO 15B kit has an aluminum dust cap and a flat
spider. The EVM 15B kit has a slightly larger paper dust cap and a cup spider.
Both kits use the same voice coil and smooth cone with an accordion surround.
This Pro Parts recone kit comes complete with
everything you need to recone your Electro Voice SRO 15B, cone with surround, spider, edge
wound aluminum voice coil, dust cap, gaskets, lead wires, centering shim, glue
and instructions. The voice coil, spider, cone and lead wires come pre-glued and
attached, to make installation very simple. The surround has already been
treated for you. This kit was assembled using a jig / fixture designed
specifically to produce this individual recone kit. Using this jig to assemble
the recone kit insures that the voice coil is glued to the spider and cone at
the proper depth every time. High strength, slow cure cyanoacrylate adhesive is
used to attach the coil and spider to the cone for a
lightweight superior glue joint. Moyen RS-3087 adhesive is supplied with each
kit for attaching the spider and surround to the speaker frame.
This is the very best
preassembled Electro Voice recone kit available. We are so sure that
you will agree, that we offer you a satisfaction guarantee! Upon receiving your kit, if you are not 100% satisfied, simply return
the uninstalled kit for a full refund of the purchase price.
2 year limited warranty.
Click here for details.
Speaker reconing is not rocket science. The
hardest part about reconing speakers is centering and setting the voice coil to
the proper depth. We have set the depth for you and your kit comes with a
centering shim to align the coil to the voice coil gap perfectly every time.
Click here for the step by step, easy to follow
instructions for installing our Pro Parts, DIY recone kits.
Yes, these are the instructions for our JBL kits, but the instructions are the
same for our Electro Voice kits.
Specifications;
- Electro Voice SRO 15B
- 15-in recone kit
- Impedance 8 ohm
- DCR 5.1
- 400 watts continuous
- 1600 watts peak
- Frequency Response 50-5000 Hz
- Voice coil diameter 2.5-in or 63.5mm
- Voice coil material is aluminum edge-wound
- Voice coil former material is Kapton
Note: due to the U.S. Department of
Transportation regulations, kits shipped outside the U.S. will not include
adhesive. Kits that contain adhesives can only be shipped via ground service.
Item Code: SRO-15B
|
